以下資料收集於 http://www.gixxer.com/forums/showthread.php?t=193288 well it can be done! you can put a 07 slip on onto an 08 stock header here is the how to with pics! 1. remove both side fairings to access exhaust and cat Click this bar to view the small image. 2. use either a cutting wheel or a hacksaw to remove the cat right up against the weld. i had to use both. cause the wheel wore down on me, the yellow is from the hacksaw blade Click this bar to view the small image. 3.once the cat is out of the way put a small bevel on the edge of the header, you will need to do this the help get the mid pipe up onto the header. it will go, may need a little elbow grease. i had to put a 2x4 against the back of the mid can and tap it with a hammer. the 2x4 will keep from damaging the pipe, i promise just dont get carried away with it! make sure to put the clamp on before you start tapping it on. Click this bar to view the small image. 4.make sure to tap it all the way till it touches the weld for the
GSX-R, PC5, Quichshifter, DIY, Modify, 測試、囉哩囉嗦、拉哩拉扎